JMS M-Series Features
Dust Collector Key Components
Mobility. Mobility combined with a compact integrated design – options to suit site access and applications.
Grydale hold the patent for manufacturing the only self propelled dust collector on the market. Track units offer full mobility with variable speeds between 3-6 k.p.h. to increase the speed and efficiency of operations. The tracks are hydraulically driven by the Volvo Penta Diesel engine and operated via remote control.
Track mobility allows dust collection units to be positioned in close proximity to dust generating activities, reducing the volume of air requiring treatment and improving the efficiency of whole site operations.
Track units are driven using remote control and are able to move and operate alongside excavation equipment such as road headers and in tunnelling are typically used for bench excavation and cross passages to provide effective dust collection at source where mobility and manoeuvrability is key.
Hydraulic Stepping System
The Hydraulic Stepping System powers four legs that lift the units up while a pair of skates help to move the unit forward/ backwards. Movement can be repeated to achieve the desired travel distance.
Hydraulic Stepping System available for: JMS 40 M-Series JMS 50 M-Series JMS 60 M-Series
Dust collectors mounted on a skid base offer a cost-effective option. The skid can be dragged using the four towing points at each end of the machine or moved by crane using the four lifting lugs.
Filtration. NATA certified dust collection efficiency of 99.99% at 0.067 micron.
Available in single, dual or multiple forms, the intakes are connected to the dirty air source via ducting. For large dust volumes we recommend single intakes, while multiple intakes can be used to extract dust from multiple sources simultaneously. Flexible couplings allow the dust collector inlet to connect effectively on uneven surfaces.
High Efficiency Filter Cartridges provide filtration of both dust and diesel particulates. Baffle plates distribute air throughout the Dust Collector system ensuring an even wear of filters. Filter access doors offer easy access, allowing efficient filter maintenance and maximising machine uptimes.
Reverse Pulse Cleaning System
All of our dust collectors have an on-board air compressor and receiver tank which feed the pneumatic system to provide reverse pulse filter cleaning. The pneumatic system’s primary function is to clean out the filters during operation to prevent dust build up on the filters.
Pressure and frequency of pulse cleaning is adjustable and helps reduce the number of filter changes required. If there is already a compressor on site, this can be utilised.
Drop Out Box
Our patented drop out box takes heavy dust particles and shotcrete fibres out of the air stream and discharges them through the augers and rotary valves before they hit the filters. This exclusive patented design extends filter life and allows the machine to handle extreme dust loading.
Example Fan Curve Only – Each Unit Has Specific Curves
Centrifugal Fan. Optimised air flow, energy efficiency and enhanced durability.
Grydale Dust Collectors feature a centrifugal fan that is optimised for the application air flow and pressure requirements. Centrifugal fans offer superior energy efficiency and enhanced durability, allowing them to operate in even the most corrosive environment.
Variable Speed Drive & Velocity Probe
One of the key aspects of Grydale JMS M-Series Dust Collectors is the inclusion of a Variable Speed Drive (VSD) as part of the standard configuration. The VSD is used in conjunction with a high precision Air Velocity Probe to allow power consumption to be regulated to achieve the air volume required. This makes the units power efficient and allows projects to reduce their power consumption by up to 40%.
Exhaust air passes through silencers to reduce noise pollution. We can also supply a square to round attachment allowing a vent bag to be attached to the exhaust side if required.
Dust Discharge System. Hydraulic powered reversible augers maximise dust discharge efficiency.
Hydraulic Reversible Augers Rotary Valves
Grydale Dust Collectors feature hydraulic reversible augers and stainless-steel rotary valve discharge system.
The use of hydraulics to power the augers and rotary valves maximises their efficiency whilst the ability to reverse the augers and force material through clean out hatches is key to increasing up-time in the event of product build up in the hopper. This reduces the maintenance effort and also reduces the requirement to have LV and HV electricians servicing a mechanical component. The augers also have an auto unblock feature.
Dust Discharge Options
Dust Collectors with incline augers allow dust particles to be discharged to 1T bulker bags.
Available on our JMS 40 M-Series, JMS 50 M-Series and JMS 60 M-Series
Units are fitted with slurry augers to discharge dust from the unit into a slurry auger by the stainless-steel rotary valve and is turned into a wet slurry before being discharged onto the site floor. This helps to prevent it from reforming into dust. The slurry auger can be run off either plant water or the onboard tank water. If plant water supply is not attached the machine will discharge material as dust but will not affect operation until the water supply can be restored.
Shotcrete drop out box
Available on our JMS 40 M-Series, JMS 50 M-Series and JMS 60 M-Series
The patented drop out box was designed to remove shotcrete and heavier particles from the airstream prior to entering the main filter house chamber and auger system. This design protects the filters whilst reducing the likelihood of a blockage being caused by larger particles or shotcrete fibres.
Control and Monitoring Options. Proprietary software facilitates ease and speed of operation.
PLC (Programmable Logic Computer)
Featuring a proprietary touch-screen display that facilitates ease of operation. The simple one-button start-up / shut-down sequence starts / stops all critical components in a programmed order, increasing the efficiency of the machine and providing additional safety measures.
The control panel allows the system to run in automatic and manual operation.
Enhances the speed, flexibility and reliability in communication and supports effective offsite troubleshooting and maintenance.
Differential and Static Pressure Gauges
Static and differential pressure monitors are used to support operators and ensure the system is running at optimum efficiency. The static pressure monitor alerts if it’s necessary to turn the system air volume up due to a long duct run or if there’s a blockage in the ducting. The differential pressure monitor alerts the operator if filters are blocked or there are higher than normal dust loads.
Safety Features. Maximising the health and safety of workers.
Grydale Dust Collectors offer a number of features that focus on maximising the health and safety of workers along with providing a safe working environment by controlling dust and fumes.
Some key safety features that are standard on Grydale dust collectors include:
Emergency Stop System
Emergency stop buttons are located around the machine. In addition, on track and stepping system units a lanyard system runs around the perimeter enabling anyone to ‘grab and kill’ the machine with immediate effect.
Split Lockable Isolators (Diesel Models)
Split starter and battery isolators allow service lights to be used when the engine is off. Full diagnostics can then be performed with minimal risk to workers.
Maintenance lights have been fitted in key locations enabling operators and maintenance works clear visibility and / or to illuminate working spaces.
Fire Suppression Systems can be added to diesel models to remain compliant with industry regulations.